Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the radio fuses located in the Citroen Jumper van?

Model: Citroen Jumper MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Car stereo

See other generations:
This video is currently unavailable

If the radio in your Citroen Jumper van suddenly stops working, the first thing you can do is check the status of the respective fuses, the location of which is indicated in this video. As shown, there are two fuses located in the box inside the cabin, in the lower area of the dashboard on the driver's side.

They are labelled F36 and F49, with amperages of 5A and 10A respectively. If faulty, ensure you replace them with spares of the same specifications to avoid damaging connected devices.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Citroen Jumper Van?
How to Remove the Radio from a Citroen Jumper Van?
Citroen Jumper (2014-2024 / MK 3) In this tutorial, see how to remove the radio from a Citroen Jumper van, a very simple and quick operation. First, ensure the key is not inserted for…
Where are the fuses on board the Citroen Jumper 2?
Where are the fuses on board the Citroen Jumper 2?
Citroen Jumper (2006-2014 / MK 2) The fuses located on board the Citroen Jumper van model 2, which was produced between 2006 and 2014, are situated in a easily accessible position for…
Where are the fuses located in the Citroën Jumper?
Where are the fuses located in the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) The fuses in the Citroën Jumper are contained within the appropriate fuse boxes installed in the vehicle: in this type of vehicle, you can find two b…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos