Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter in a Citroen Jumper Van?

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Diesel fuel filter

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the diesel filter in a Citroen Jumper van, a very simple and quick operation. First, open the driver's door, then remove the indicated cover and disconnect the negative terminal of the battery.

Next, open the bonnet, remove the plastic cover, disconnect the two fuel hoses, and unscrew the four bolts securing the filter. Finally, extract the filter from its housing, drain any diesel present, and insert the replacement along with a new seal.

To reassemble everything, simply follow the reverse procedure.


Updated on 13 August 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter on a Citroen Jumper 3?
How to Replace the Diesel Filter on a Citroen Jumper 3?
Citroen Jumper (2014-2024 / MK 3) The diesel filter is part of regular maintenance, to be performed at service intervals and every certain mileage, as referenced in the user manual. H…
Replacing Air Filter on Citroen Jumper
Replacing Air Filter on Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) How to remove the air filter from a Citroen Jumper? Let’s look at removing the filter located in the engine bay. Lift the front bonnet of the Jumper,…
How to Replace the Cabin Air Filter on a Citroen Jumper
How to Replace the Cabin Air Filter on a Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) If you want to independently replace the cabin air filter in your Citroen Jumper but don't know how to perform the operation, follow the steps descri…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos