Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Citroen Jumper 3?

Model: Citroen Jumper MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Diesel fuel filter

See other generations:
Video tutorial

The diesel filter is part of regular maintenance, to be performed at service intervals and every certain mileage, as referenced in the user manual. Here is a video guide explaining step-by-step how to approach this DIY task on the Citroen Jumper 3. After locating it near the base of the windscreen, disconnect the electrical connector above it, then remove the fuel inlet and outlet pipes, and finally unscrew its locking bolts.

Once the housing is open, extract the old filter, insert the new one, and reassemble everything.


Posted on 28 February 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter in a Citroen Jumper Van?
How to Replace the Diesel Filter in a Citroen Jumper Van?
Citroen Jumper (2006-2014 / MK 2) In this tutorial, you will learn how to replace the diesel filter in a Citroen Jumper van, a very simple and quick operation. First, open the driver'…
Where to Find the OBD2 Port on a Citroen Jumper
Where to Find the OBD2 Port on a Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) If you are curious about where to find the OBD2 port on your Citroen Jumper, simply read the following steps carefully and apply them. First, open th…
Where are the fuses on board the Citroen Jumper 2?
Where are the fuses on board the Citroen Jumper 2?
Citroen Jumper (2006-2014 / MK 2) The fuses located on board the Citroen Jumper van model 2, which was produced between 2006 and 2014, are situated in a easily accessible position for…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos