Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program the TPMS sensor of a PSA vehicle with Lexia

Model: Citroen Citroen Various
Part: Tire pressure warning light

In this video we can see how it is possible to program a TPMS sensor for PSA (Citroen or Peugeot). First, we take note of the sensor's ID: we will need it for the following steps. Then, we open the calculator in programmer mode to perform a base change. The sensor's ID is a hexadecimal number, however it must be entered in decimal in Lexia, following the example that the youtuber indicates. Move to the sensor ID programming window, answering the questions that are asked, as indicated in the video. The answers are validated; at this point the sensor code is written in the ECU: check the position of the sensor that was removed, and insert the code of the new one in its place. Finally, after confirming and starting the car, the new sensor will be successfully recognized.

Posted on 4 July 2024 by ScegliAuto

Video tutorial

Related tutorials

A Different Perspective on PSA Oil Bath Timing Belt
A Different Perspective on PSA Oil Bath Timing Belt
Citroen Citroen Various For once, let’s analyse the Puretech 1.2 PSA engine from a different perspective. Its most famous defect is the oil bath timing belt: this solution r…
How to Programme a Citroën Key?
How to Programme a Citroën Key?
Citroen Citroen Various To programme a Citroën key, insert the ignition key into the ignition barrel so that it can be recognised. Once the key is inserted, connect the diag…
Theoretical Operation of the AdBlue System on Peugeot/Citroen
Theoretical Operation of the AdBlue System on Peugeot/Citroen
Citroen Citroen Various In this video, we see an animation explaining the theoretical operation of the PSA pollution control system with AdBlue: we observe the position of t…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos