Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the adblue warning light in the Citroen Jumpy?

Model: Citroen Jumpy MK 3 - Years 2016-2026
Part: AdBlue warning light

Let's make a brief introduction to the anti-pollution additive adblue, used in the latest generation diesel engines to reduce emissions. It is equipped, inside the vehicle, with its own tank, which warns of the need to top up, through the warning light on the instrument panel. After the aforementioned top-up, if the warning light does not turn off, it is advisable to go to the workshop and, through the connection of a PC to the vehicle's Obd socket, connect to the ECU, access the general Menu, select the Anomalies section and identify the warning light in question, resetting it in a few seconds.

Posted on 12 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the AdBlue warning light on the Citroën Jumpy
How to reset the AdBlue warning light on the Citroën Jumpy
Citroen Jumpy (2007-2016 / MK 2) To perform the reset procedure on a Citroen Jumpy vehicle related to the AdBlue warning light, we need to use a diagnostic computer. To carry out the…
How do you reset the Service light on the Citroën Jumpy?
How do you reset the Service light on the Citroën Jumpy?
Citroen Jumpy (2016-2026 / MK 3) The Service light that is shown on the instrument panel of the Citroën Jumpy can be reset by holding down the button located in the center left part …
How to Reset the Service Light on the 2018 Citroen Jumpy
How to Reset the Service Light on the 2018 Citroen Jumpy
Citroen Jumpy (2016-2026 / MK 3) This video tutorial shows the procedure to reset the maintenance or service light on the 2018 Citroen Jumpy. To reset the light, first insert the key…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos