Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Dokker
    4. : Checks and maintenance

Dacia Dokker - Checks and maintenance

Checks And Maintenance Dacia Dokker (2013-2024 / mk 1)

Dacia Dokker (2013-2024 / MK 1)
Where to Find the VIN Number on a Dacia Dokker
In this video, we will locate the VIN (Vehicle Identification Number) on the chassis of the Dacia Dokker. The number, stamped for vehicle identification, is …Read all…
Posted on 4 November 2026 by ScegliAuto
Dacia Dokker (2013-2024 / MK 1)
Where is the EOBD Socket on the Dacia Dokker?
In this video, we can see where the EOBD (European On Board Diagnostic) socket is located on the Dacia Dokker. This socket is essential for accurately …Read all…
Posted on 8 October 2026 by ScegliAuto
Dacia Dokker (2013-2024 / MK 1)
How to Adjust the Valve Clearance on the Dacia Dokker 1.4
In this video, you will learn how to adjust the valve clearance on the Dacia Dokker with a 1.4 petrol engine, as well as on other Renault group models with the …Read all…
Posted on 10 June 2026 by ScegliAuto
Car stereo (4) Spark plugs (1) Key (1) Timing belt (1) Checks and maintenance (3) Headlight (1) Tail light (1) Air filter (1) Cabin air filter (3) Clutch (1) Headlight bulb (4) Clock (4) Door trim panel (1) Pump (1) Fuel pump (1) Wheel (1) Fuse box (4) Seat (1) AdBlue warning light (3) Warning light – error code (8) (1) Tire pressure warning light (8) Service warning light (22) Windshield wipers (1)

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos