Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Dokker
    4. : Tire pressure warning light

Dacia Dokker - Tire pressure warning light

Tire Pressure Warning Light Dacia Dokker (2013-2024 / mk 1)

Dacia Dokker (2013-2024 / MK 1)
How to reset the tyre pressure warning light on a Dacia?
Follow these steps to reset the tyre warning light after replacing or inflating the tyres. Insert the key and turn on the instrument cluster, ensuring the …Read all…
Posted on 16 July 2026 by ScegliAuto
Dacia Dokker (2013-2024 / MK 1)
How to Reset the TPMS Light on a Dacia Dokker
If the TPMS light on the instrument cluster of your Dacia Dokker lights up despite no pressure loss or punctures, follow these instructions to complete the …Read all…
Posted on 24 September 2026 by ScegliAuto
Dacia Dokker (2013-2024 / MK 1)
How to Reset the TPMS Light on a Dacia Dokker
The TPMS sensor is located inside the four wheels of the vehicle and plays an important role in real-time monitoring of the exact tyre pressure. In case of …Read all…
Posted on 13 August 2026 by ScegliAuto
Car stereo (4) Spark plugs (1) Key (1) Timing belt (1) Checks and maintenance (2) Headlight (1) Tail light (1) Air filter (1) Cabin air filter (3) Clutch (1) Headlight bulb (4) Clock (4) Door trim panel (1) Pump (1) Fuel pump (1) Wheel (1) Fuse box (4) Seat (1) AdBlue warning light (3) Warning light – error code (8) (5) Tire pressure warning light (3) Service warning light (22) Windshield wipers (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos