Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Dacia Dokker

Model: Dacia Dokker MK 1 - Years 2013-2024
Part:

To manually reset the tyre pressure light on your Dacia Dokker, no professional diagnostic tool is required; you only need to use a single button located on the steering wheel to complete the procedure easily and safely. First, insert the key and turn on the ignition. Next, press the Up arrow button located on the right side of the steering wheel several times. Locate the tyre pressure option on the display and hold down the same button used earlier for a few seconds. Once the reset is complete, turn off the ignition.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on a Dacia Dokker?
How to Reset the Tyre Warning Light on a Dacia Dokker?
Dacia Dokker (2013-2024 / MK 1) In this tutorial, you will see how to reset the tyre warning light on a Dacia Dokker, a very simple and quick operation to perform only after restori…
How do you reset the tire pressure warning light on the Dacia Dokker?
How do you reset the tire pressure warning light on the Dacia Dokker?
Dacia Dokker (2013-2024 / MK 1) It will be possible to completely reset the tire pressure warning light of the Dacia Dokker by inflating the tires to the recommended pressure value:…
How do you reset the tire pressure light on the Dacia Dokker?
How do you reset the tire pressure light on the Dacia Dokker?
Dacia Dokker (2013-2024 / MK 1) To reset the tire pressure warning light of the Dacia Dokker, you will need to inflate the tires to the recommended pressure value: this value will b…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos