Do it yourself
| ||||
|
Dacia Dokker - Video tutorial
Model: Dacia Dokker
MK 1
- Years 2013-2023 Today's guide will show us the main instructions on how to disassemble and replace the wheel with the spare one on the Dacia Dokker. First, we open the rear hatch of the trunk and start unscrewing the spare wheel screw, in order to lower it from the support; then we use the jack provided to lift the car, unscrewing the wheel bolts to remove it, as shown in the video. At this point, we proceed to install the new spare wheel or the spare tire, fixing the bolts in a crossed manner; finally, we reposition the entire kit and the old wheel in the luggage compartment!
Posted on 27 April 2024 by ScegliAuto
Other guides that may interest you |
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |