Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a Dacia Dokker

Model: Dacia Dokker MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tire pressure warning light

Video tutorial

The TPMS sensor is located inside the four wheels of the vehicle and plays an important role in real-time monitoring of the exact tyre pressure. In case of malfunctions or reading errors, you need to reset it manually using the car's controls.

First, insert the key and start your Dacia Dokker. Then, press the button located at the end of the right lever on the steering wheel multiple times until you see the "set up" option on the dashboard display.

At this point, hold down the same button until the display stops flashing. Finally, switch off the ignition and the reset is complete.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on a Dacia Dokker
How to Reset the TPMS Light on a Dacia Dokker
Dacia Dokker (2013-2024 / MK 1) If the TPMS light on the instrument cluster of your Dacia Dokker lights up despite no pressure loss or punctures, follow these instructions to comple…
How to Reset the AdBlue Warning Light on the Dacia Dokker
How to Reset the AdBlue Warning Light on the Dacia Dokker
Dacia Dokker (2013-2024 / MK 1) To reset the AdBlue warning light on the Dacia Dokker, you need to add the required amount of additive liquid into the tank: to top it up, open the f…
How to Reset the AdBlue Warning Light on the Dacia Dokker?
How to Reset the AdBlue Warning Light on the Dacia Dokker?
Dacia Dokker (2013-2024 / MK 1) When the AdBlue warning light illuminates on the Dacia Dokker's instrument panel, it means that the level of additive liquid in the designated tank i…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos