Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Dokker
    4. : Headlight bulb

Dacia Dokker - Headlight bulb

Dacia Dokker (2013-2023 / MK 1)
How do you replace the headlight bulb on your Dacia Dokker?
In order to replace the Dacia Dokker headlight bulb, you need to go and open the bonnet, so that you can access the components located inside the engine …read all…
Posted on 17 May 2023 by ScegliAuto
Dacia Dokker (2013-2023 / MK 1)
How to replace the headlight bulb on Dacia Dokker
Replacing the headlight bulb is an easy do-it-yourself maintenance and the advice is to always replace them in pairs to ensure uniformity of lighting; given …read all…
Posted on 20 June 2022 by ScegliAuto
Dacia Dokker (2013-2023 / MK 1)
Change bulb on Daca Dokker
Let's see how to remove and replace the headlight bulbs of a Dacia Dokker. We lift the front hood of the car and arrive in the back of the headlight. We remove …read all…
Posted on 7 January 2024 by ScegliAuto
Car stereo (4) Spark plugs (1) Key (1) -board computer (3) Checks and maintenance (12) Headlight (1) Tail light (1) Cabin air filter (1) Clutch (1) Headlight bulb (3) Engine oil (1) Door panel (1) Tires (1) Pump (1) Fuel pump (1) Instrument cluster (6) Wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos