Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Dacia
  4. :
  5. Logan
  6. : How to replace light bulbs on Dacia Logan

Dacia Logan - Video tutorial

Model: Dacia Logan MK 1 - Years 2004-2012
Part: Headlight bulb
Operation: How to replace light bulbs on Dacia Logan

Let's see together how to remove the headlight bulbs on a Dacia Logan. We open the bonnet by pulling the lever located at the bottom right of the dashboard, let's put it in safety. We find the inspection cap of the lighthouse and (placed in the rear part of the lighthouse) remove it. At this point we will find the bulbs with metal hooks, take out the lamp holders from the lighthouse and go to extract the damaged bulb with the help of a screwdriver and pliers. We mount the new bulb and (always suitable type and size) insert the lamp holder in the headlight housing and close the headlight with the inspection cap. We test the correct functioning of the lights.


Posted on 15 October 2023 by ScegliAuto

This video is currently unavailable


How to replace the ceiling light bulbs on dacia Logan
Dacia Logan (2012-2022 / MK 2) Let's see how to replace the bulbs placed in the ceiling light of the roof panel of a Dacia Logan. Use a screwdriver to pry between the ceiling light
How to replace the taillight and the third brake light bulb of the Dacia Logan
Dacia Logan (2012-2022 / MK 2) Below we will see the procedure for disassembling and replacing the third brake light and its bulbs on the Dacia Logan, as well as the Sandero. First
How to change the rear light bulb on dacia Logan
Dacia Logan (2004-2012 / MK 1) Let's see how to replace the headlight bulbs on Dacia Logan. We raise the front hood. With a screwdriver we remove the plastic cap that covers the he

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos