Do it yourself
Frequently asked questions about cars and motorcycles

How to repair the turn signal switch of a Dacia Sandero

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, we can see how to repair the turn signal switch of a Dacia Sandero (but it also applies to the Duster), after ruling out a fuse problem. The horn easily breaks because the yellow/blue wires tend to break with the movement of the knob.

To remove the turn signal switch from its housing, just remove the two screws and lever with a screwdriver on the cover; there are no springs or pieces that jump off: to understand what happens to the low beams, we must also remove the bottom part with the same system.

The problem with the low beam slider was that one of the feet of the slider was stuck and not making contact, so by cleaning and lubricating it, it started working again.

These are rather simple devices that can still be repaired.


Posted on 23 January 2025 by ScegliAuto


Related tutorials

Dacia Sandero (2012-2020 / B8) Follow these instructions to remove and replace the indicator switch and hazard lights on a Dacia Sandero Stepway in simple and quick steps. First, g…
Dacia Sandero (2008-2012 / BS) In this video tutorial, you will learn how to dismantle and repair the horn button on a first-generation Dacia Sandero by following these simple step…
Dacia Sandero (2008-2012 / BS) How to replace the light switch on a Dacia Sandero? Before removing the switch, disconnect the battery terminals. Use a suitable screwdriver to remov…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos