Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator Switch on a Dacia Sandero

Model: Dacia Sandero B8 - Years 2012-2020

Follow these instructions to remove and replace the indicator switch and hazard lights on a Dacia Sandero Stepway in simple and quick steps. First, get inside the vehicle and start by removing the plastic cover behind the steering wheel by unscrewing the two securing screws underneath. Next, unscrew the indicator switch screws and disconnect the electrical connector to remove it, as shown in the video. At this point, install the new original indicator switch by applying the reverse procedure!

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Dacia Sandero's light switch
Replacement of the Dacia Sandero's light switch
Dacia Sandero (2012-2020 / B8) Today we will discover the instructions that will allow us to disassemble and replace the turn signal switch of the Dacia Sandero. First of all, we g…
How to Remove the Indicator Stalk on a Dacia Sandero
How to Remove the Indicator Stalk on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) How to remove the indicator stalk on a Dacia Sandero? Follow these steps for disassembly. Before removing the car's steering wheel, disconnect the ba…
How to Remove the Plastic Cover of the Steering Wheel and Switches on a Dacia Sandero
How to Remove the Plastic Cover of the Steering Wheel and Switches on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) In today's video tutorial, you will learn how to disassemble and replace the plastic covers of the steering wheel and the switches for the indicator …

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the washer fuse located in a Dacia Sandero II? Read answer
    • Sandero 2012-2020 - When is the first service done on the Dacia Sandero? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos