Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Window Switch Panel on the Dacia Sandero 2

Model: Dacia Sandero B8 - Years 2012-2020
Part: Checks and maintenance

If you want to replace the window switch panel on your Dacia Sandero second generation, follow the procedure described in this guide. Before starting the actual steps, ensure you have a new switch panel that is fully compatible with your Dacia Sandero MK2. Now, get into the car and remove the existing switch panel from the door, then disconnect the electrical connector and connect it to the new switch panel. Position the new panel in its designated compartment, and you are done.

Posted on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Sandero (2012-2020 / B8) To remove the door panel of the Dacia Sandero, loosen the corresponding fastening screws so that the panel can be completely freed from its housing: …
Dacia Sandero (2021-2026 / MK 3) In today's video, you will see how to remove the door panel of the current generation Dacia Sandero. First, open the door you want to work on. Remove…
Dacia Sandero (2012-2020 / B8) When the engine of your Dacia Sandero overheats abnormally even at low speeds, it is very likely that it is time to replace the appropriate air filte…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2021-2028 - When to service the petrol Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the fuse box of the Dacia Sandero Stepway located? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos