Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Plastic Cover of the Steering Wheel and Switches on a Dacia Sandero

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

See other generations:
Video tutorial

In today's video tutorial, you will learn how to disassemble and replace the plastic covers of the steering wheel and the switches for the indicator and windscreen wipers on a Dacia Sandero. First, get into the vehicle and start unscrewing the screws of the plastic covers located above and below the steering wheel to remove them.

Then, unscrew the additional screws of the switches (indicator and windscreen wipers), disconnecting the electrical harnesses to remove and replace them with new ones, as shown in the video. Now, reassemble your components by following the reverse procedure!


Updated on 20 May 2026 by ScegliAuto


Related tutorials

Replacement of the Dacia Sandero's light switch
Replacement of the Dacia Sandero's light switch
Dacia Sandero (2012-2020 / B8) Today we will discover the instructions that will allow us to disassemble and replace the turn signal switch of the Dacia Sandero. First of all, we g…
How to replace the cabin air filter of the Dacia Sandero 3
How to replace the cabin air filter of the Dacia Sandero 3
Dacia Sandero (2021-2026 / MK 3) If you want to find out how to replace the cabin air filter of your third series Dacia Sandero, all you have to do is read the following guide and fo…
How to change the battery of the Dacia Sandero key
How to change the battery of the Dacia Sandero key
Dacia Sandero (2008-2012 / BS) To replace the battery inside the key of your first generation Dacia Sandero on your own, you only need a small crosshead screwdriver and a new batte…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the washer fuse located in a Dacia Sandero II? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos