Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Dacia Sandero's light switch

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to disassemble and replace the turn signal switch of the Dacia Sandero. First of all, we get into the car and start by removing the plastic cover behind the steering wheel; then we unscrew the fixing screws of the turn signal switch, located inside, disconnecting the entire wiring to remove the lever together with the electrical part of the turn signal switch, as shown in the video.

At this point, we carry out the repair or directly replace the light switch, applying the reverse procedure for reassembly!


Posted on 31 May 2025 by ScegliAuto


Related tutorials

How to Replace the Light Switch on a Dacia Sandero
How to Replace the Light Switch on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) How to replace the light switch on a Dacia Sandero? Before removing the switch, disconnect the battery terminals. Use a suitable screwdriver to remov…
What to Do If the Dipped Headlights on a 2016 Dacia Sandero Do Not Work
What to Do If the Dipped Headlights on a 2016 Dacia Sandero Do Not Work
Dacia Sandero (2012-2020 / B8) The video shows us a common problem with this generation of Dacia Sandero, and also on other Dacia models from this period: the front headlights do n…
How to Reset the "Tyre Pressure" Light on a Dacia Sandero
How to Reset the "Tyre Pressure" Light on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero. Start by turning the ignition key to start the engine. Next, select the "Set tp" op…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the washer fuse located in a Dacia Sandero II? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos