Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the speakers of the Dacia Duster

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Speaker

See other generations:
Video tutorial

Today we will explain how to replace the speakers of the Dacia Duster on your own. The speakers are located inside the front and rear door panels. To replace the speakers, we need to use a flathead screwdriver and a screwdriver.

Insert the flathead screwdriver into the speaker cover and with a slight pressure outwards, remove the cover. Using the electric screwdriver, unscrew the four screws that secure the speaker and after removing it, disconnect the connector to remove it. Connect the new speaker and insert it into its slot.

Screw in the screws and replace the cover. Proceed in the same way for replacing the other speakers.


Posted on 26 February 2025 by ScegliAuto


Related tutorials

How do you replace the speakers in a Dacia Duster?
How do you replace the speakers in a Dacia Duster?
Dacia Duster (2017-2024 / HM, MK 2) Replacing the speakers in a Dacia Duster is an operation that requires a bit of patience, but with the right instructions, it is within everyone's re…
How to Reset the Tyre Pressure Light on a Dacia Duster
How to Reset the Tyre Pressure Light on a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Start by sitting in the driver's seat of your Dacia Duster, then start the engine by turning the key in the ignition. Next, using the selection butto…
Where are the fuses located in the Dacia Duster?
Dacia Duster (2010-2017 / MK 1, HS) To find all the fuses of your first-generation Dacia Duster, you need to carefully read the following guide and follow the described steps. First, ma…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos