|
Do it yourself
| |||
| ||||
How to replace the original Dacia antenna with a shark fin type on a Duster
Model: Dacia Duster
HM, MK 2
- Years 2017-2024
To install the shark fin antenna on a Dacia Duster, we first need to remove the old antenna: we will make space in the roof rack to be able to get between the outer roof and the inner roof; to do this, we need to remove the side panels of the trunk, which are all snap-on and pressure. Once this is done, we can loosen the inner roof and reach the antenna wire, but first we disconnect the electrical connectors located on the right pillar of the trunk; we remove the fixing screw, then all the cables and clean the area where we will install the new antenna, which we can find for example on Amazon with the code B0DQ1763DW at the price of 14.19 euros, free delivery. We pass the cable through the hole and connect the new connectors, tighten the fixing screw. Now we can put back the roof rack and the pillars and the trunk linings that we had previously removed. Job done.
Posted on 30 April 2025 by ScegliAuto
Video tutorial
Related tutorials
Dacia Duster
(2010-2017 /
HS, MK 1)
It is advisable to remove the antenna before washing your car to prevent the brushes from tearing it off the roof and damaging the bodywork. Removing…
Dacia Duster
(2010-2017 /
HS, MK 1)
Do you want to replace the car radio antenna on your Dacia Duster and don't know how to proceed? Let's see in this video the very simple operations t…
Dacia Duster
(2010-2017 /
HS, MK 1)
Below are the step-by-step instructions to remove and replace the radio antenna on the Dacia Duster. First, get inside the vehicle and start by remov…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.056
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |