|
Do it yourself
| |||
| ||||
How to install a shark fin antenna on a Dacia Duster III.
Model: Dacia Duster
P1310
- Years 2024-2026
Let's see in this video how to install a shark fin antenna on a Dacia Duster III: first, let's get the antenna, which we can find on Amazon, for example, with the code B0DQ1763DW at a price of 14.19 euros, with free shipping. We need to fold down the backrest of the rear seat and remove the plastic covering on the right side, both from the seat side and from the trunk area: these are snap-on pieces that come off easily; just pry them off with a plastic spatula. Unfortunately, since we need to move the felt headliner, we will also have to remove it from the opposite side. To move the headliner, we will need to remove the visible black clips - very carefully because they are quite thin - and the rear handles on the roof, in order to take off the rubber gasket. This will allow us to lower the ceiling enough to get our hand inside. The connection for the shark fin antenna is the same as the regular antenna, so we don’t need to worry about that. We place the antenna on the roof and connect the cables on the right side, as shown in the video. Now we need to reassemble everything, starting with the rubber gasket, then the handles, the black clips in the roof, and then the coverings inside the trunk, and finally the piece that finishes the right side of the rear seat.
Posted on 29 November 2025 by ScegliAuto
Video tutorial
Related tutorials
Dacia Duster
(2017-2024 /
HM, MK 2)
To install the shark fin antenna on a Dacia Duster, we first need to remove the old antenna: we will make space in the roof rack to be able to get be…
Dacia Duster
(2010-2017 /
HS, MK 1)
It is advisable to remove the antenna before washing your car to prevent the brushes from tearing it off the roof and damaging the bodywork. Removing…
Dacia Duster
(2010-2017 /
HS, MK 1)
Below are the step-by-step instructions to remove and replace the radio antenna on the Dacia Duster. First, get inside the vehicle and start by remov…
Other guides you may be interested in
|
How to Open the Bonnet of a Renault Megane if the Lever is Broken?
If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.324
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |