Do it yourself
Frequently asked questions about cars and motorcycles

How to Change Oil and Filter on a Dacia Sandero

Model: Dacia Sandero BS - Years: 2008, 2009, 2010, 2011, 2012
Part: Engine oil

See other generations:
Video tutorial

How to change oil and filter on a Dacia Sandero? A simple operation by following the right steps, see in this video how to proceed. Lift the car on a column lift (jack), after removing the cover panel, unscrew the oil sump bolt with a socket; let the fluid drain into a container (for disposal) and re-screw the oil sump bolt.

Remove the filter from its housing and replace it. Lower the car to the ground and lift the bonnet, securing it. Finally, top up the engine with new oil. Measure the oil level with the metal dipstick several times until the ideal level is reached.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

Dacia Sandero (2008-2012 / BS) Replace the engine oil on a Dacia Sandero? Replace oil and filter at the mileage indicated in the owner's manual. Lift the car with a jack to access …
Dacia Sandero (2008-2012 / BS) To replace the cabin air filter in a Dacia Sandero, first locate where it is situated. In this case, it is located inside the cabin, specifically on …
Dacia Sandero (2012-2020 / B8) In this video, learn how to replace the diesel filter on a second-generation Dacia Sandero 1.5 diesel. Start by lifting the car and removing the pass…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos