Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on the Dacia Duster 3

Model: Dacia Duster P1310 - Years 2024-2026
Part: Tail light bulb

Today, we will see how to easily and quickly replace the rear light bulbs on the Dacia Duster model 3. To perform the replacement, open the boot and remove the right and left side panels to access the lamp housing. Unscrew the plastic support nut and disconnect the central connector. Remove the light unit from its housing and take off the lens by unscrewing the screws. Remove the old bulbs and insert the new ones, connecting them in the correct position. Close the lens cover and refit the light unit following the reverse procedure in its housing. Repeat the same steps for the left rear light bulbs.

Posted on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the high beam bulb on a Dacia Duster 2
How to replace the high beam bulb on a Dacia Duster 2
Dacia Duster (2017-2024 / HM, MK 2) Replacing the high beam bulb on a Dacia Duster 2 follows a similar procedure to other cars: after opening the bonnet, locate and remove the rear rubb…
How to disassemble the rear lights in the Dacia Duster?
How to disassemble the rear lights in the Dacia Duster?
Dacia Duster (2017-2024 / HM, MK 2) In this tutorial, we can see how to disassemble the rear lights on the Dacia Duster, a very simple and quick operation. First of all, make sure that …
How to replace the front headlight bulb of the Dacia Duster
How to replace the front headlight bulb of the Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) To replace the front headlight bulbs of the Dacia Duster from halogen bulbs to LED bulbs, we need to open the front hood and remove the plastic cover…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos