Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam on a Dacia Duster

Model: Dacia Duster HM, MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Headlight

See other generations:
Video tutorial

In this guide, you will learn how to replace the dipped beams on a Dacia Duster. Start by opening the bonnet; in the area behind the headlights, you will find a plastic cap: pull it out simply, as shown at minute 0:30. Now, remove the bulb connector to disconnect it from the car's electrical system.

At this point, you can pull the bulb out from its holder inside the headlamp. Replace it with the new bulb, which you will insert back into the headlamp.

Finally, reconnect the connector and close everything with the plastic cap.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to turn on the low beam lights of the front headlights of the Dacia Duster
How to turn on the low beam lights of the front headlights of the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) The following video tutorial shows us the steps to turn on or off the low beam and high beam lights of the Dacia Duster model 2. To turn on the low b…
Installing LED Lights on the Dacia Duster
Installing LED Lights on the Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) In this video, see how to install LED bulbs on the Dacia Duster. Once the headlamp is removed (it is easier to work this way than directly on the car…
How to Reset the "Tyre Pressure" Light on a Dacia Duster
How to Reset the "Tyre Pressure" Light on a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Before starting, sit in the driver's seat of your Dacia Duster. Start the engine by turning the key in the ignition switch. Then, select the "Set tp"…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos