|
Do it yourself
| |||
| ||||
How to Replace or Repair the Indicator Switch on a Dacia Duster MK1
Model: Dacia Duster
HS, MK 1
- Years 2010-2017
The indicator switch on the Dacia Duster MK1 is prone to chronic failure. The repeated movement of the lever causes the internal wire soldering to break, particularly that of the horn (yellow and blue wires). The symptom is the horn stopping working while the other lights remain active. To replace it, unscrew the two screws that secure the indicator switch to the steering column. Disconnect the main electrical connector by pressing the release tab. The new part can be found on Amazon with the code B08JVF87HP at a price of £21.99, and it installs in a few minutes. If you prefer to repair the old one, it can be carefully opened to resolder the detached wires. Extend the wires and solder them to the correct points: the horn will start working again. Although not essential, having a spare ready prevents being without lights. The repair is feasible and cost-effective.
Posted on 19 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Dacia Duster
(2010-2017 /
HS, MK 1)
Have you encountered issues with the indicator stalk on your Dacia Duster? Follow this guide to disassemble it: disconnect the battery cables located…
Dacia Duster
(2010-2017 /
HS, MK 1)
Before starting, sit in the driver's seat of your Dacia Duster. Start the engine by turning the key in the ignition switch. Then, select the "Set tp"…
Dacia Duster
(2010-2017 /
HS, MK 1)
Start by sitting in the driver's seat of your Dacia Duster, then start the engine by turning the key in the ignition. Next, using the selection butto…
Other guides you may be interested in |
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.053
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |