Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb of a Dacia Sandero Stepway

Model: Dacia Sandero BS - Years: 2008, 2009, 2010, 2011, 2012
Part: Headlight

See other generations:
Video tutorial

See how to replace the front headlamp bulb of a Dacia Sandero Stepway. First, after parking the car on a ramp or flat surface and securing it with the handbrake, open the bonnet and locate the headlamp from which you want to replace the bulb.

Remove the rubber cap that protects the electrical contacts from water and moisture, then disconnect the power connector of the bulb to be replaced. At this point, push and move the spring that holds the bulb to the right.

Now you can extract the bulb from its socket and replace it with the new one. To reassemble everything, simply reverse the steps taken.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Dacia Sandero Stepway
How to Reset the "Service" Light on a Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero Stepway. Start by repeatedly pressing the button located at the end of the right ind…
How to Change the Cabin Light Bulb on a Dacia Sandero Stepway 2
How to Change the Cabin Light Bulb on a Dacia Sandero Stepway 2
Dacia Sandero (2012-2020 / B8) This guide explains how to remove and replace the cabin light bulb on a second-generation Dacia Sandero, Stepway version, as well as on the Duster. F…
How to Change the Headlight Bulb on the Dacia Sandero Stepway
How to Change the Headlight Bulb on the Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) This guide explains how to remove a front headlight bulb from a Dacia Sandero. First, open the bonnet from inside the vehicle using the lever located…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos