Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Headlight Bulb on the Dacia Sandero Stepway

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight bulb

See other generations:
Video tutorial

This guide explains how to remove a front headlight bulb from a Dacia Sandero. First, open the bonnet from inside the vehicle using the lever located at the bottom of the dashboard.

Once the bonnet is open, secure it with the prop rod. You will notice caps corresponding to the headlights that need to be removed. After removing the headlight caps, extract the headlight holder with the bulb attached.

Simply remove the old bulb and insert the new one. Before finishing, remember to close the headlight and the bonnet.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on Dacia Sandero Stepway?
How to Replace the Front Headlight Bulb on Dacia Sandero Stepway?
Dacia Sandero (2012-2020 / B8) To replace the front headlight bulb on the Dacia Sandero Stepway, open the bonnet to access the engine compartment. Next, remove the protective cap f…
How to Replace the Front Headlamp Bulb of a Dacia Sandero Stepway
How to Replace the Front Headlamp Bulb of a Dacia Sandero Stepway
Dacia Sandero (2008-2012 / BS) See how to replace the front headlamp bulb of a Dacia Sandero Stepway. First, after parking the car on a ramp or flat surface and securing it with th…
How to Reset the "Service" Light on a Dacia Sandero Stepway
How to Reset the "Service" Light on a Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero Stepway. Start by repeatedly pressing the button located at the end of the right ind…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos