Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on Dacia Sandero Stepway?

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Light bulb

See other generations:
Video tutorial

To replace the front headlight bulb on the Dacia Sandero Stepway, open the bonnet to access the engine compartment. Next, remove the protective cap from the back of the headlight: by removing the cap, you can extract the bulb and disconnect it from the connector.

At this point, connect the new bulb to the connector and insert it into the appropriate housing, closing the back of the headlight with the corresponding cap. After replacement on both sides, check the operation of the new bulbs.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb of a Dacia Sandero Stepway
How to Replace the Front Headlamp Bulb of a Dacia Sandero Stepway
Dacia Sandero (2008-2012 / BS) See how to replace the front headlamp bulb of a Dacia Sandero Stepway. First, after parking the car on a ramp or flat surface and securing it with th…
How to Replace the Front Headlamp Bulb on a Dacia Sandero
How to Replace the Front Headlamp Bulb on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) To replace the front headlamp bulb on your Dacia Sandero, open the bonnet to access the components at the rear of the corresponding headlamp. Once th…
How to Replace the Front Headlight Bulb of the Dacia Sandero?
How to Replace the Front Headlight Bulb of the Dacia Sandero?
Dacia Sandero (2008-2012 / BS) To replace the front headlight bulb of the Dacia Sandero, open the bonnet to access the engine compartment. Next, remove the cover cap from the insid…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos