|
Do it yourself
| |||
| ||||
How to Change Engine Oil and Oil Filter on a Dacia Duster 1.5 Dci MK1
Model: Dacia Duster
MK 1, HS
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
Let's see how to change the oil and filter on a Dacia Duster 1.5 Dci MK1: Warm the engine oil slightly to make it more fluid, then safely lift the car, resting it on axle stands. On this type of engine, the oil filter is hidden, so you need to unscrew the sensor support from the air filter housing to access the filter. Place a container under the filter and unscrew it with the appropriate tool, then let the residual oil drain out. Now install the new filter, but after cleaning the seat and lubricating the filter seal with clean oil; then screw it in by hand without overtightening. Now we need to drain the old oil; take your container and place it under the sump. Remove the plug and let all the old oil drain out. Dispose of it at an authorised centre. Replace the plug and washer, and from the filler cap at the top of the engine, refill with new oil according to the manufacturer's specifications; check with the dipstick, then run the engine for a few minutes, turn it off and check the level again, topping up if necessary. Check for any leaks.
Posted on 23 September 2026 by ScegliAuto
Related tutorials
Dacia Duster
(2010-2017 /
MK 1, HS)
Today, in this short and simple guide, you will learn how to perform the routine maintenance service by replacing the engine oil and oil filter on th…
Dacia Duster
(2010-2017 /
MK 1, HS)
The complete service on the Dacia Duster 1.5 dCi includes oil change, filters, and additives. Start with the cabin filter, located under the dashboar…
Dacia Duster
(2010-2017 /
MK 1, HS)
Today, learn how to independently replace the oil filter and engine oil on a Dacia Duster model 1. Open the front bonnet and remove the oil filler ca…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to enter the radio code in the Opel Zafira?
In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.093
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |