Do it yourself
Frequently asked questions about cars and motorcycles

How to change the engine oil and oil filter of the Dacia Duster GPL.

Model: Dacia Duster MK 2, HM - Years 2017-2024
Part: Engine oil

Today we will explain how to perform the engine oil and oil filter replacement on a 2023 Dacia Duster. The oil we will use for the replacement is "Castrol GTX 5W-30," which is specific for Dacia models, and the filter model is Bosch P7231. Before removing the plug from the oil pan to help the oil drain out faster, we will remove the cap located above the reservoir by opening the front hood. We will lift the vehicle with a jack on jack stands and remove the oil pan nut by unscrewing the six screws. While the oil drains into the container, we will use a torque wrench to unscrew the oil filter cap for replacement. We will install the oil pan plug and bring the vehicle back to the ground. To conclude the replacement, we will pour 5 liters of oil into the oil reservoir.

Posted on 3 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Dacia Duster (2017-2024 / MK 2, HM) Replacing the oil filter and oil on the 2019 Dacia Duster with a GPL engine is an easily achievable task on your own. The steps to follow for the rep…
Dacia Duster (2017-2024 / MK 2, HM) In today's tutorial video, you will learn how to replace the engine oil filter and change the oil on a second-generation Dacia Duster. First, lift th…
Dacia Duster (2010-2017 / HS, MK 1) How do you change the engine oil on a Dacia Duster? In this video, learn how to proceed: lift the car on a column lift or jack, after removing the pl…

Other guides you may be interested in

    Frequently Asked Questions

    • Duster 2017-2024 - How many km does the first service have to be done on the Dacia Duster? Read answer
    • Duster 2017-2024 - How many liters of oil do you need to put inside the engine of a Dacia Duster 1.5dCi? Read answer

How to Reset the Tyre Pressure Warning Light on a Mitsubishi Space Star?

Resetting the low tyre pressure warning light on the new Mitsubishi Space Star is very simple. Let's see how to do it in the attached video tutorial for the new Attrage, which is also valid for our Space Star as they share the same instrumentation. Turn on the ignition without using any pedals, then repeatedly press the long right button until you reach the tyre screen, identifiable by the warning light in the top right corner of the display. At this point, hold down the same button; a beep will confirm the successful completion of the procedure.

Watch the video!


by ScegliAuto

More videos