|
Do it yourself
| |||
| ||||
How to perform a service on the Dacia Duster 1.5 dCi
Model: Dacia Duster
HS, MK 1
- Years 2010-2017
The complete service on the Dacia Duster 1.5 dCi includes oil change, filters, and additives. Start with the cabin filter, located under the dashboard on the passenger side. Remove the cover, extract the filter, spray disinfectant, and reinstall the new filter following the arrow (towards the cabin). Add the internal engine cleaner and let it run at idle for 15 minutes. Drain the oil from the plug (8 mm square key), replacing the gasket. Replace the oil filter, clean the seat, and tighten by hand. Change the air filter by unscrewing the box (Torx T25). For the fuel filter, remove the wheel and wheel arch, unscrew the protection and pipes (green, white, blue). Prime the system with the manual pump. Top up with 4.8-5 litres of 5W30 oil, adding additive B2 and injector cleaner. Reset the service by pressing the accelerator fully, turning on the ignition, and pumping the brake three times.
Posted on 18 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Dacia Duster
(2010-2017 /
HS, MK 1)
Today we will see the instructions that will allow us to remove and replace the timing belt on the Dacia Duster 1.5 dCi. First, open the vehicle's bo…
Dacia Duster
(2010-2017 /
HS, MK 1)
Today, you will see how to remove the fuel filter from a Dacia Duster 1.5 DCi, following the steps outlined below. First, lift the front of the vehic…
Dacia Duster
(2010-2017 /
HS, MK 1)
Today, in this short and simple guide, you will learn how to perform the routine maintenance service by replacing the engine oil and oil filter on th…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.179
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |