|
Do it yourself
| |||
| ||||
How to Replace the LPG Filter on a Dacia Duster II
Model: Dacia Duster
HM, MK 2
- Years 2017-2024
In this video tutorial, you will see how to replace the LPG filter on a Dacia Duster II: it is recommended to replace the filter every 25,000 miles to prevent excessive dirt build-up. First, close the LPG cylinder by hand-tightening the valve, then start the engine to consume any remaining LPG in the system. Loosen the bolts on the front wheel on the driver's side, lift the car with a jack, and place safety stands under the vehicle; completely unscrew the wheel bolts, remove the wheel, and place it under the car. Remove the plastic cover, unscrew the cap, and work on the clips (use a flathead screwdriver to extract the plastic clip). Disconnect the electrical cable from the metal protection clip; remove the filter holder by loosening the metal clamp and then take it out along with the hose. Unscrew the second 10 mm nut and then remove the protection. Remove the filter cover by unscrewing the three 8 mm screws, then extract the filter and the two seals. Lubricate the new seals, place the small seal at the bottom of the filter holder, and insert the new filter.
Updated on 17 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Dacia Duster
(2010-2017 /
HS, MK 1)
All Dacia Duster vehicles have an air filter inside that is used for air circulation within the engine. Each vehicle has a different filter model dep…
Dacia Duster
(2017-2024 /
HM, MK 2)
Replacing the oil filter and oil on a 2019 Dacia Duster with a LPG engine is a straightforward DIY task. Follow these steps: First, lift the vehicle …
Dacia Duster
(2017-2024 /
HM, MK 2)
In this video, we see how to evaluate the condition of the spark plugs of a Dacia Duster GPL: they are located near the oil refill cap, clearly visib…
Other guides you may be interested in
|
How to Open the Bonnet of a Renault Megane if the Lever is Broken?
If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.082
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |