Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Dacia
  4. :
  5. Sandero
  6. : Removing the door panel on Sandero

Dacia Sandero - Video tutorial

Model: Dacia Sandero BS - Years 2008-2012
Part: Door panel
Operation: Removing the door panel on Sandero

Removing the door panel on Sandero? Let's see how the front cover panel is removed. We unscrew the screws placed in the space of the upper lever of the door opening and the screws present in the internal handle. Unscrew the screws on the sides of the door panel and detach the clips for tightening it. Remove the panel with your hands and unhook it from the door (disconnect the power cables and the opening cable). We carry out the desired maintenance inside the door (replacement of window lifters, locks or speakers). We fasten the cover panel together with all the pieces.


Posted on 21 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos