Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gear Knob on a Duster

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Shift knob

See other generations:
Video tutorial

How to remove the damaged gear knob on a Dacia Duster? Here’s how to remove it from above the operating shaft. Use a plastic lever to disconnect the leather gaiter frame, lifting it until it detaches from the knob.

Hold the knob in your hands and rotate it left and right until it comes off the gear shaft (cut the plastic tie). For reassembly, take the new knob and slide it onto the shaft in the centre console, securing it to the shaft; install the new leather gaiter with the clips over the centre console (tighten the gaiter to the knob).

Ensure all parts associated with the gear knob are correctly fitted.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on a 2014 Renault Duster
How to Replace the Gear Knob on a 2014 Renault Duster
Dacia Duster (2010-2017 / MK 1, HS) Today, I will explain how to replace the gear knob on the 2014 Dacia Duster. Replacing the gear knob is a very simple and quick task that can be done…
How to Replace the Gear Knob on a Dacia Duster?
How to Replace the Gear Knob on a Dacia Duster?
Dacia Duster (2010-2017 / MK 1, HS) To replace the gear knob on your Dacia Duster, start by sitting in the driver's seat. Then, grasp the gear knob. At this point, simply pull upwards t…
Remove Gear Knob on Dacia Duster
Remove Gear Knob on Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Replace the knob mounted on the gear stick of a Dacia Duster. Enter the vehicle and start removing the knob above the centre tunnel. Take the knob in…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos