Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Bulbs on Dacia Sandero

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight bulb

See other generations:
Video tutorial

In today's guide, you will see the instructions to remove and replace the front headlamp bulbs (as well as other bulbs) on a second generation Dacia Sandero. First, open and lift the bonnet: then remove the plastic protective cap and disconnect the electrical connector; now unclip the metal spring and extract the dipped beam bulb.

Next, replace the position bulb found separately: remove its plastic cap and take out the bulb holder along with the bulb: pull to replace it. Follow the same procedure for the indicator bulb!


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Replacing Front Bulbs on Dacia Sandero
Replacing Front Bulbs on Dacia Sandero
Dacia Sandero (2008-2012 / BS) Are the front headlamp bulbs on your Dacia Logan blown? Let's replace them. Open the bonnet by pulling the lever located at the bottom right of the d…
Replacing the Rear Light Bulbs on a Dacia Sandero
Replacing the Rear Light Bulbs on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) We will discover the steps that will allow us to dismantle and replace the rear light bulbs on a Dacia Sandero. First, open the rear tailgate of the …
How to Replace the Bulb on a Dacia Sandero
How to Replace the Bulb on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) Are the headlights of your Dacia Sandero Stepway not working? Follow this guide to replace the bulbs. Open the bonnet and secure it. Remove the rubbe…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos