Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulb on a Dacia Sandero

Model: Dacia Sandero BS - Years: 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

See other generations:
Video tutorial

Are the headlights of your Dacia Sandero Stepway not working? Follow this guide to replace the bulbs. Open the bonnet and secure it. Remove the rubber cap located at the back of the headlamp.

Reach into the headlamp and disconnect the power connector and the spring that holds the bulbs in place. Replace the damaged bulbs with new ones (same size and voltage).

Refit the cap in its specific housing and tighten the screws. Check the operation of the lights.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Bulb of a Dacia Sandero
How to Replace the Front Bulb of a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before starting, open the front bonnet of your Dacia Sandero. Begin by removing the rear plastic cover of the bulb. By doing this, you will reach the…
How to Change the Headlight Bulb on a Dacia Sandero
How to Change the Headlight Bulb on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Here are the steps to remove and replace the headlight bulb on a Dacia Sandero. First, open the bonnet and start by removing the plastic cap found be…
How to Replace the Front Bulb of a Dacia Sandero
How to Replace the Front Bulb of a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before you can start, open the front bonnet of your Dacia Sandero. Start by removing the rear plastic cover of the bulb. By doing this, you will reac…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos