Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulb of a Dacia Sandero

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight bulb

See other generations:
Video tutorial

Before you can start, open the front bonnet of your Dacia Sandero. Start by removing the rear plastic cover of the bulb.

By doing this, you will reach the rear connector of the bulb, which you will need to disconnect and pull away. Once you have removed the connector, you will reach the bulb retaining clip, which you will need to unclip, freeing the bulb.

At this point, you can remove the blown bulb, and the disassembly will be complete. To fit the new bulb and close the headlamp, just follow these instructions in reverse, and you will have completed the replacement.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Bulb of a Dacia Sandero
How to Replace the Front Bulb of a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before starting, open the front bonnet of your Dacia Sandero. Begin by removing the rear plastic cover of the bulb. By doing this, you will reach the…
How to replace the headlight bulb of the Dacia Sandero.
How to replace the headlight bulb of the Dacia Sandero.
Dacia Sandero (2008-2012 / BS) Today we will explain how to replace the headlight bulb of the Dacia Sandero. To perform the replacement, we need to open the front hood and remove t…
How to Replace the Rear Light Bulb on a Dacia Sandero?
How to Replace the Rear Light Bulb on a Dacia Sandero?
Dacia Sandero (2008-2012 / BS) To replace the rear light bulb on a Dacia Sandero, open the rear tailgate to access the components inside the boot. On the side of the boot, you will…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos