Do it yourself
Frequently asked questions about cars and motorcycles

How to Install Wind Deflectors on the Dacia Duster?

Model: Dacia Duster HM, MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Checks and maintenance

See other generations:
Video tutorial

Installing wind deflectors on the Dacia Duster 2 is a straightforward task that requires no special tools. The procedure may vary depending on the model of deflector purchased; some may have adhesive strips to enhance their grip.

Generally, as shown in the attached video, lower the window completely and insert the front part of the deflector into the gap first, then secure the top part. It is important to raise the window gradually the first time to avoid damage if the deflector is not perfectly aligned.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

Dacia Duster (2017-2024 / HM, MK 2) Learn how to fit mud flaps on the Dacia Duster: as the YouTuber rightly points out, the Duster's wheels are large and somewhat exposed, so when there…
Dacia Duster (2017-2024 / HM, MK 2) Today, this short video tutorial will show you the location of the cabin air filter on the Dacia Duster and how to remove it if you need to replace i…
Dacia Duster (2010-2017 / MK 1, HS) All Dacia Duster vehicles have an air filter inside that is used for air circulation within the engine. Each vehicle has a different filter model dep…

    Frequently Asked Questions

    • Duster 2017-2024 - What's the problem with the Dacia Duster's LPG? Read answer
    • Duster 2017-2024 - Where is the lpg filter located in the Daciaa Duster? Read answer
    • Duster 2010-2017 - Where is the inertia switch of the Dacia Duster located? Read answer
    • Duster 2017-2024 - What does the Dacia Duster "Anti-Pollution Control" label mean? Read answer
    • Duster 2017-2024 - Where is the horn of the Dacia Duster located? Read answer
    • Duster 2017-2024 - Where do i find the jack on a Dacia Duster? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos