Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Duster
    4. : How to replace the exterior mirror on the Dacia Duster MK2

Dacia Duster - Video tutorial

Model: Dacia Duster HM, MK 2 - Years 2017-2024
Part: Outside rearview mirror
Operation: How to replace the exterior mirror on the Dacia Duster MK2

In this video tutorial we will see the main instructions to be able to disassemble and replace the exterior mirror on the second series Dacia Duster, in simple steps. First we open the front door and start by disassembling and removing the door panel, unscrewing all the screws and disconnecting the various cables and electrical connectors; then we go to remove the triangular cover and disconnect the electric connector of the mirror, as shown in the video. At this point we are going to unscrew the screws that we find behind the mirror, pulling it out from the outside; then replace it with the new one!


Posted on 28 May 2024 by ScegliAuto

This video is currently unavailable


Removing the mirror Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) Today we will talk to you about how to quickly remove the exterior mirror on your Dacia Duster, second version. If your intent is only to replace the
How to remove the Dacia Duster mirror
Dacia Duster (2010-2017 / HS, MK 1) Replace the exterior mirror on the Dacia Duster? We disassemble the door panel to disassemble the mirror. We remove the part of the inner lining of t
How to close and adjust the rearview mirrors of the Dacia Duster.
Dacia Duster (2010-2017 / HS, MK 1) In this video, we see how to close and adjust the exterior rearview mirrors of the Dacia Duster: we will need to act on the adjustment wheel located

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos