Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Dacia Sandero

Model: Dacia Sandero B8 - Years 2012-2020
Part: Service warning light

To reset the Service light on a Dacia Sandero, you need to connect a diagnostic tool to the car's OBD port, located at the bottom left of the steering column. Once connected, select the car model and proceed with the reset as indicated on the display: press the accelerator pedal and, while holding it down, press the brake pedal three times. Finally, complete the last reset using the scanner and check that the light is off by switching the ignition off and back on.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light of the Dacia Sandero
How to reset the service light of the Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) The service light of the 2021 Dacia Sandero 3 is activated when it is necessary to perform maintenance on the vehicle. After carrying out the checks …
How to reset the service light on a Dacia Sandero vehicle
How to reset the service light on a Dacia Sandero vehicle
Dacia Sandero (2021-2026 / MK 3) To reset the service light on the Dacia Sandero, we must first perform the operations that include the service, such as replacing fluids, filters, ch…
How to Reset the Service Light on Dacia Sandero - Dokker - Logan
How to Reset the Service Light on Dacia Sandero - Dokker - Logan
Dacia Sandero (2012-2020 / B8) Let’s go through the step-by-step instructions to reset the service light for the routine maintenance oil change on a second-generation Dacia Sandero…

    Frequently Asked Questions

    • Sandero 2012-2020 - What does the "Service" warning light on a Dacia Sandero Stepway mean? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos