Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Light Bulbs in the Dacia Sandero?

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
Video tutorial

As you can see in this tutorial, replacing the position light bulbs in the Dacia Sandero is an extremely simple and quick task. Before proceeding, ensure that the key is not inserted for safety.

Start by opening the bonnet, then position yourself near the headlamp in question and remove the large rubber cap located at the back of it. Once done, grasp the bulb at the bottom, pull it outwards, and separate it from the housing. At this point, simply disconnect the connector, insert the replacement, and reassemble everything.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

Replacing the Key Fob Battery for Dacia Duster - Sandero
Replacing the Key Fob Battery for Dacia Duster - Sandero
Dacia Duster (2017-2024 / HM, MK 2) This guide outlines the steps to disassemble and replace the battery in the key fob (Keyless) for the Dacia Duster and Sandero. First, take the key f…
How to Deactivate the AdBlue Warning Light on the Dacia Duster - Sandero
How to Deactivate the AdBlue Warning Light on the Dacia Duster - Sandero
Dacia Duster (2017-2024 / HM, MK 2) Today's guide will show you the steps to reset the AdBlue warning light on the Dacia Duster, as well as the Sandero. First, top up the AdBlue fluid b…
How to Reset the Tyre Pressure Warning Light on the Dacia Duster - Sandero
How to Reset the Tyre Pressure Warning Light on the Dacia Duster - Sandero
Dacia Duster (2010-2017 / MK 1, HS) In today's video, you will learn how to reset the tyre pressure warning light (TPMS) on the Dacia Duster, as well as the Sandero. First, get in the v…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos