Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Fob Battery for Dacia Duster - Sandero

Model: Dacia Duster HM, MK 2 - Years 2017-2024
Part: Key

This guide outlines the steps to disassemble and replace the battery in the key fob (Keyless) for the Dacia Duster and Sandero. First, take the key fob and remove the plastic rear cover by sliding it back. Next, take out the small battery found inside, as shown in the video. Now, install the new battery of the correct type (in this case, a CR 2032 3V); insert it in the correct orientation into the designated compartment and reassemble the key fob!

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Remote Battery of the Dacia Duster
How to Change the Remote Battery of the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) Below are the steps on how to disassemble and replace the battery of the electronic key remote for the Dacia Duster. First, take the remote in hand a…
How to Replace the Key Fob Battery of the Dacia Duster?
How to Replace the Key Fob Battery of the Dacia Duster?
Dacia Duster (2017-2024 / HM, MK 2) Replacing the key fob battery of the Dacia Duster 2 is very simple; let’s see how to proceed in the attached video tutorial. Start by opening the rea…
How to Replace the Key Fob Battery in a Dacia Duster
How to Replace the Key Fob Battery in a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Today, we will discover the procedure and instructions that will allow you to disassemble and replace the battery in the key fob of the Dacia Duster.…

Other guides you may be interested in

    Frequently Asked Questions

    • Duster 2017-2024 - What does the Dacia Duster wrench warning light indicate? Read answer
    • Duster 2010-2017 - Cost of duplicate Dacia car keys? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos