Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dacia Sandero Maintenance Reset

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Warning light – error code

See other generations:
Video tutorial

If you have changed the oil and filter on this car model, you must complete the job by resetting and updating the service light on the dashboard. The necessary information is provided below.

Access the cabin. Turn on the ignition and within 10 seconds: Press and hold the accelerator pedal.

Press the brake pedal three times until it reaches the end of its travel. Release both pedals at the same time.

Turn off the ignition and check the reset by turning the ignition back on.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Dacia Sandero
How to Reset the Service Light on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Below, we will discover how to reset the maintenance warning (service) light on a Dacia Sandero. First, get in the vehicle and turn on the instrument…
Resetting the service light of the Dacia Sandero.
Resetting the service light of the Dacia Sandero.
Dacia Sandero (2012-2020 / B8) Today's instructions will allow us to reset the regular maintenance reminder for the engine oil change of the Dacia Sandero. First, we get into the c…
Resetting the Maintenance Light on the Dacia Sandero 2
Resetting the Maintenance Light on the Dacia Sandero 2
Dacia Sandero (2012-2020 / B8) In this video tutorial, we will see how to reset the routine maintenance light that appears on the instrument panel of the second series Dacia Sander…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where to find the Dacia Sandero car radio code? Read answer
    • Sandero 2021-2028 - What does the error code DF003 mean in the Dacia Sandero? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos