Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : How to replace the external rearview mirror of the Dacia Sandero.

Dacia Sandero - Video tutorial

Model: Dacia Sandero B8 - Years 2012-2020
Part: Outside rearview mirror
Operation: How to replace the external rearview mirror of the Dacia Sandero.

Today's instructions will show us the process of disassembling and replacing the external rearview mirror of the Dacia Sandero. First, we open the front door and begin by removing the triangular plastic cover of the mirror. Then, we remove the handle cover and unscrew the screws located underneath and on the sides of the panel, in order to detach and remove it, as shown in the video. At this point, we unscrew the fastening screws of the external rearview mirror, sliding it out from the outside. We replace it with the new one and reassemble everything!


Posted on 2 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Sandero 2012-2020 - How to replace the exterior mirror in the Dacia Sandero? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos