Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance light on a Dacia Dokker

Model: Dacia Dokker MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Warning light – error code

Video tutorial

If the orange maintenance light appears on the instrument panel of your Renault Dokker and you do not know how to reset it manually, carefully read the following instructions and put them into practice. First, turn on the panel and press the button located at the end of the right steering lever multiple times until the maintenance message (with a small spanner icon) appears on the display.

At this point, press and hold the same button used earlier for a few seconds and release it when the display stops flashing.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Dacia Dokker
How to Reset the Service Light on a Dacia Dokker
Dacia Dokker (2013-2024 / MK 1) Learn how to reset the service light on a Dacia Dokker: turn on the instrument cluster without starting the engine, then repeatedly press the button …
How to Reset the Oil Warning Light on a Dacia Dokker
How to Reset the Oil Warning Light on a Dacia Dokker
Dacia Dokker (2013-2024 / MK 1) In this brief video tutorial, you can see how to reset the maintenance warning light on a Dacia Dokker. Start by ensuring all the car doors are close…
How do you reset the Service light on the Dacia Dokker?
How do you reset the Service light on the Dacia Dokker?
Dacia Dokker (2013-2024 / MK 1) To completely reset the Service light of the Dacia Dokker, it will be possible to insert the ignition key into the corresponding slot, turning it to …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos