Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Warning Light on a Dacia Dokker

Model: Dacia Dokker MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

Video tutorial

In this brief video tutorial, you can see how to reset the maintenance warning light on a Dacia Dokker. Start by ensuring all the car doors are closed, then turn on the instrument panel without starting the engine.

Once done, the reset operation is very simple; just press and hold the accelerator pedal while simultaneously pressing the brake pedal fully three times within ten seconds. Now you can turn off and restart the car to check if the reset was successful.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Warning Light on a Dacia Dokker?
How to Reset the Tyre Warning Light on a Dacia Dokker?
Dacia Dokker (2013-2024 / MK 1) In this tutorial, you will see how to reset the tyre warning light on a Dacia Dokker, a very simple and quick operation to perform only after restori…
How do you reset the tire pressure warning light on the Dacia Dokker?
How do you reset the tire pressure warning light on the Dacia Dokker?
Dacia Dokker (2013-2024 / MK 1) It will be possible to completely reset the tire pressure warning light of the Dacia Dokker by inflating the tires to the recommended pressure value:…
How to Reset the AdBlue Warning Light on the Dacia Dokker
How to Reset the AdBlue Warning Light on the Dacia Dokker
Dacia Dokker (2013-2024 / MK 1) To reset the AdBlue warning light on the Dacia Dokker, you need to add the required amount of additive liquid into the tank: to top it up, open the f…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos