Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Inner Door Panel on a Dacia Duster III

Model: Dacia Duster P1310 - Years: 2024, 2025, 2026
Part: Car door

See other generations:
Video tutorial

Here’s how to remove the inner door panel of a Dacia Duster III: start by removing the plastic covers at the access points; unscrew all visible screws: near the mirror, in the panel, and at the bottom. Use plastic trim tools to pry and release the clips, then pull the upper part upwards with your hands, being careful as the plastics are delicate.

Look for the blue connector for the window switch at the back, using a thin tool to press the release tab. Since the plastic clips break easily, it is advisable to have some spares on hand; take the opportunity to insert sound-absorbing material against the metal.


Posted on 2 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel of a Dacia Duster
How to Remove the Front Door Panel of a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Before starting, open the front door of your Dacia Duster. First, unclip and remove the window switch from its housing, then disconnect the electrica…
How to Remove the Mirror on Dacia Duster
How to Remove the Mirror on Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Replacing the external mirror on the Dacia Duster? Remove the door panel to take off the mirror. Remove the inner trim part of the mirror (there are …
How to Remove the Front Door Panel of the Dacia Duster
How to Remove the Front Door Panel of the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) In this video tutorial, learn how to remove and replace the front door panel of the Dacia Duster by following these simple and quick steps. First, op…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos