Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel of the Dacia Duster

Model: Dacia Duster HM, MK 2 - Years 2017-2024
Part: Door trim panel

In this video tutorial, learn how to remove and replace the front door panel of the Dacia Duster by following these simple and quick steps. First, open the front door and start by removing the plastic cover of the grab handle; then unscrew the fixing screws located underneath and on the sides of the door panel using a T30 and T20 Torx spanner, as shown in the video. At this point, lever the sides of the panel to detach and remove it, disconnecting the electric connector of the window switch and the handle cable.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of a Dacia Duster
How to Remove the Front Door Panel of a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Before starting, open the front door of your Dacia Duster. First, unclip and remove the window switch from its housing, then disconnect the electrica…
Disassembly of the front door panel of the Dacia Duster
Disassembly of the front door panel of the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) Below we will see the procedure for disassembling and replacing the front door panel of the Dacia Duster. First of all, we open the front door of the…
How to disassemble the front door panel of the Dacia Duster
How to disassemble the front door panel of the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) These short and simple steps will show us how to disassemble the front door panel of the Dacia Duster. First, we open the front door of the car and s…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos