Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front door panel of the Dacia Duster

Model: Dacia Duster HM, MK 2 - Years 2017-2024
Part: Door trim panel

Below we will see the procedure for disassembling and replacing the front door panel of the Dacia Duster. First of all, we open the front door of the car and start disassembling and removing the window switch panel and the door handle, unscrewing the screws and disconnecting the electrical connector; then we remove the plastic side clips, gently detaching and removing the panel on the sides, as shown in the video. At this point, it will be possible to access the speaker or the window mechanism, applying the reverse procedure for reassembling the panel!

Posted on 7 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of a Dacia Duster
How to Remove the Front Door Panel of a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Before starting, open the front door of your Dacia Duster. First, unclip and remove the window switch from its housing, then disconnect the electrica…
Removing the Front Door on a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Remove the right front door panel on a Dacia Duster. Using a screwdriver, unscrew the screws located in the space of the upper door opening lever and…
How to Remove the Front Door Panel of the Dacia Duster
How to Remove the Front Door Panel of the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) In this video tutorial, learn how to remove and replace the front door panel of the Dacia Duster by following these simple and quick steps. First, op…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos