Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the turn signal lever of the Dacia Logan

Model: Dacia Logan MK 2 - Years 2012-2022

The following steps will show us how to disassemble and replace the turn signal lever of the Dacia Logan, as well as the Sandero and Duster. First, we get into the car and start removing the plastic cover behind the steering wheel by unscrewing the fixing screw; then we unscrew the screws of the turn signal lever, disconnecting the electrical connector to remove everything, as shown in the video. At this point, we carry out the repair or replacement of the indicator, following the video tutorial until the end for reassembly!

Posted on 24 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing Front and Rear Logos and Bumper
Removing Front and Rear Logos and Bumper
Dacia Logan Video on assembling and disassembling body parts of the Dacia Logan. …
Where is the OBD2 port located in the Dacia Logan?
Where is the OBD2 port located in the Dacia Logan?
Dacia Logan (2004-2012 / MK 1) In the following guide you will find the description of all the steps you need to follow to easily find the OBD2 port located inside the cabin of you…
How to remove the car radio from a Dacia Logan?
How to remove the car radio from a Dacia Logan?
Dacia Logan (2012-2022 / MK 2) Good morning, today we are here with the goal of disassembling the car radio of our Dacia Logan. Let's start by sitting in the driver's seat. Then, w…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos