Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the exhaust pipe of the Derbi Rambla 125?

Model: Derbi Rambla 125
Part: Exhaust muffler

This video is currently unavailable

In order to replace the exhaust of the Derbi Rambla 125, you need to loosen the screws that fix it to the appropriate supports on the right side of the motorcycle near the rear wheel. Once the screws are loosened, you can proceed by widening the ring that connects the exhaust terminal to the manifold.

By doing this, you can completely remove the old exhaust and install the new one. The new exhaust can now be fixed so that it connects to the manifold, making sure that everything works correctly even after the replacement.


Posted on 14 May 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Wheel of a Derbi Rambla 125?
How to Replace the Rear Wheel of a Derbi Rambla 125?
Rambla 125 To replace the rear wheel of a Derbi Rambla 125, loosen the bolts securing the exhaust at the rear of the bike. Once these bolts are loosened, you ca…
How do you replace the exhaust pipe of the Derbi Rambla 125?
Rambla 125 To replace the exhaust pipe of the Derbi Rambla 125, you need to loosen the screws that fix the exhaust terminal to its housing, on the right side of…
Oil and Oil Filter Change on Derbi Rambla 125
Oil and Oil Filter Change on Derbi Rambla 125
Rambla 125 Position a container under the engine compartment and use a 24 mm extended socket to unscrew the drain bolt clearly shown in the video. While collect…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Engine Light on a Yamaha Ray RZ?

To reset the engine light on a Yamaha Ray RZ, connect a diagnostic tool to the vehicle's OBD port. The OBD port is located just above the battery housing, accessible by removing the panel in the centre of the footwell. Once this panel is removed, connect the scanner and select the car model and its corresponding version. After connecting the scanner and following the tutorial steps, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos